Maximator VETEQ 泄漏测试台可用于氢复合压力容器生产过程结束时的泄漏测试。

国内、国际法规以及客户产品规范均要求进行气瓶下线泄漏测试，以确保每个容器的性能和安全。泄漏测试采用示踪气体进行，可以在真空舱或压力舱中进行快速准确的整体测试。在测试过程中，容器将被安全地加压至标称工作压力，并在减压过程中回收示踪气体。

Maximator VETEQ 泄漏测试台分为 3 种尺寸，以适应所有常用的容器尺寸。根据容器尺寸和应用，客户可以配置经过验证的模块化设计，尺寸为 S、M 或 L。

The use case of the Maximator VETEQ Leak Test Stand is the leak test at the end of the production process of hydrogen composite pressure vessels.

National and international regulations as well as customer specifications mandate end-of-line leak testing to ensure performance and safety of every vessel. The leak test is performed with a tracer gas which allows fast and accurate integral testing in a vacuum or accumulation chamber. During testing, the vessels will be safely pressurized to nominal working pressure and the tracer gas is recovered during depressurization.

The Maximator VETEQ Leak Test Stand is divided into 3 sizes to fit all commonly produced vessel sizes. Based on the vessel dimensions and later application, customers can configure the proven modular design in the sizes S, M or L.